The "QTA" (Quarter-Turn-Anchor,) is a Tubing Anchor designed to prevent movement of the tubing during
pumping operations, thus increasing pump efficiency and decreasing wear on rods. When set, the "QTA"
Tubing Anchor will prevent the tubing and rods from falling should the tubing part. Install the QTA Anchor in
the Tubing String just below or above the pump for best results, although it may be installed at any point.
The Anchor can be left in tension or compression, depending on well conditions and the required application.
The J-Slot design allows easy setting and releasing; 1/4 turn right-hand set, right-hand release.
For more information click
here to download a detailed PDF